A blog for the compressed air user
Kaeser Know How is a blog for the compressed air user in New Zealand where you can find a wealth of knowledge as well as advice and tip and tricks that could help you plan, design and operate an optimised and efficient compressed air system.
Blog posts from 2016
Top 5 compressor blog posts for 2016
December 2016
From compressed air station ventilation to heat recovery and energy efficiency, read on to discover what the top 5 compressor blog posts were in 2016…
Keep cool this Summer!
November 2016
In this blog we share the article ‘next summer will surely come!’ which discusses how to avoid overheating problems in a compressed air station.
Are you comparing ‘apples with apples’?
October 2016
In this blog we provide an extract from a recent whitepaper which discusses how to ensure you get meaningful data for the realistic comparison of blower quotations.
10 steps towards compressed air energy efficiency - part 2
September 2016
Following on from last month’s blog post we look at the final 5 out of 10 tips and tricks that could help you achieve an efficient compressed air system!
10 steps towards compressed air energy efficiency - part 1
August 2016
In this blog we look at the first 5 out of 10 tips and tricks that could help you achieve an efficient compressed air system.
Not just a lot of hot air! [Infographic]
July 2016
From heating warehouses and workshops to generating hot water, in this blog we look at how operating a heat recovery system can generate big savings and minimise costs for compressed air users.
Protect your compressed air system with the correct condensate drainage
June 2016
In this blog we look at how to correctly drain condensate and achieve substantial energy savings at the same time.
Screw blower or rotary lobe blower?
May 2016
In this blog we provide an extract from a recent whitepaper which discusses the two most commonly used low pressure system solutions for aeration in a wastewater treatment plant.
3 tips for planning optimal compressed air station ventilation
April 2016
In this blog we look at 3 top tips for planning optimal compressed air station ventilation.
What to consider when planning your compressor installatio
March 2016
In this blog we look at the top 3 factors that should be considered when designing the layout of a compressed air system for optimum reliability and performance.
Industry 4.0 101
February 2016
In this blog we look at what this new era - Industry 4.0 - is all about and the benefits to manufacturers of utilising Industry 4.0-ready compressed air technologies. Includes Industry 4.0 infographic.
New Year. New Compressed Air Resolutions.
January 2016
In this blog we look at 5 resolutions you can make this year when it comes to improving the all up efficiency of your compressed air system.